I have several affiliate links in both my posts and on the sidebar. All opinions are mine! Thanks so much for your support.

Friday, December 31, 2010

Friday Freebie from Lettering Delights!

Hurry over and grab these while they are free! Click on the image to go to the site.

Engagement card

My girlfriend's daughter just got engaged.  She really likes the Victorian style so I made this up for her engagment card. 
I popped out the figures with pop dots, although it is a little hard to see.  
UPDATE: her wedding colors are black, red and white so I had to add some red.  I (carefully!) pulled off the figures and added a strip of red to the card. Here is what it looks like now: 
The inside has another image. 

Thursday, December 30, 2010

Cards and a MTC border file

Feeling like I am over winter already.  I know, I know, it barely started. So I decided to herald the hoped-for spring by making some spring cards.


I found these lovely card blanks at Michaels (8 for $1) and just couldn't pass them up!  Here are 2 of the cards.  I used a Martha Stewart border punch and thought, "Hey that would be easy to make in MTC!" So a border punch file for you to try!


Here are the bare cards, ready for decoration and creativity!


So the first one was made with the punch and a Letter Delights graphic (one of the free ones that you can download here).  Blinged it out with glitter pens.  It's a little hard to see the bling but it is there!
 The second is very simple - just a bow and sticker.  But I like simple. 
Here is the border punch file for you (can also click on the image) or from box.net here

Thursday, December 23, 2010

Christmas Freebies from Lettering Delights!!

Lettering Delights  is offering this delightful bundle for FREE to celebrate the season. Be sure to travel here to find it (or search for "Jillustration's Jolly Holiday Bundle" if you get lost). Enjoy!!

Wednesday, December 22, 2010

Shhh...it's a secret!

I found this wonderful recipe for Body Scrub on the Thank You Gifts Blog Hop, just love this!  It was on Ruthie's blog here: http://septemberninth.blogspot.com/2010/12/thank-you-gifts-blog-hop.html 

I had to make some up and try it out  -  I can tell you that it really works.  So I made up a few for some friends for Christmas - hope they don't see this post until afterwards!
The one on the left is a brown sugar scrub, on the left the plain version.  I am not sure which I like best! They both smell wonderful, with a bit of a tropical flavor.  Try it, you'll like it!

Creative Notes: Labels were made in PSE and MTC using a Lettering Delights graphic from the Mulberry Lane Two graphic set and attached with a silver elastic cord. Jars were purchased at Hobby Lobby and flowers were adhered with foam tape to the lid.  Green ribbon from HL clearance bin, the iridescent ribbon  I think I got at either Walmart or the Dollar Tree.

Tuesday, December 21, 2010

Bow with photo

How would you like to make a personalized bow like this?  I made this one for a wedding gift decoration and it was so much fun!

These bows are crazy addictive!  Once you start, you just keep wanting to make another one, they are that much fun. Instructions are included in the file (under notes).  You can also follow the discussion on the MTC forum here.  The link to download the file from box.net here or here.

Saturday, December 18, 2010

Lettering Delights: 30% on a $15 purchase


Click here to start shopping!

Coupon Code: HolidayDelight

Tuesday, December 14, 2010

Scalloped Tags - just in time for Christmas!

Someone had requested a tag with a scalloped top, so I designed one.  Download from here.

Monday, December 13, 2010

Christmas Digital Paper

I shot this photo and applied the star-burst effect last night. It would make a great background for your Christmas pages. Download here.  I'f you use it I'd love to see your projects.

I used the bow file from the previous post to make a bow from this photo.  I printed it out on a 8.5 x 11" paper, and choose a matching color for the other side. Here is what it looks like after cutting on the cricut: 

This is what the bow looked like after assembly.

Gift Bow file for MTC

Do a web search and you'll find several ways to make a gift bow, but I have designed one for MTC.  JeannetteC from the forum has allowed me to use her assembly directions and pictures here. Forum discussion is here.

Bow file: download here. This is for 8.5 x 11" paper and will make one bow.  This file can also be resized to 12x12.



To assemble:
Method 1: (Starting from the center and building down)
Take a small one and make a loop. Place brad inside it, poking out.
Working with the smallest strips to the longest,
Take a strip, place on the brad with the wrong side touching, bend around and put other end on the brad, again with the wrong side touching. Keep repeating, spacing the pieces out to form the bow.
Open the brad to hold bow in place. 







Method 2: (starting from the bottom and building up)
Working from the largest to the smallest,
Take a strip, place on the brad with the good side down, bend around and put other end on the brad, again with the good side down. Keep repeating, spacing the pieces out to form the bow until you have one piece left.
Put the one end on the brad as before, but loop this last one into a ring, then put the other end on the brad.
Open brad to hold bow in place. 





Both methods get tricky as the bow gets fuller.

Friday, December 10, 2010

Free SVG files from Lettering Delights

 Click  here  or on the link at the top of the blog to go to the Lettering Delights site, and click here:

Unofficial FAQ for MTC

This is a work in progress, but I would like to address some Frequently Asked Questions (FAQs) about Make-the-Cut! software and using the Forum.  This is by no means complete (nor is it endorsed by the creator of MTC) and will evolve as time goes on.  

Getting Started
  1. Demo Version.  What features are available in the paid version (registered version) and the Demo version of the program?  The Demo version and the registered version are exactly the same - the only difference is that the Demo version cuts a line through you design when you cut it. From the official website: "The demo of the software is fully functional.  When cutting a project, the demo will watermark what it cuts.  To remove this watermark on future cutting projects, you must register."  (http://make-the-cut.com/Download.aspx )                                                                                      
  2. Registration Key.  Help! I paid for and installed MTC but now I have a new computer. I've lost my registration key, how do I get it again?   Go here: http://make-the-cut.com/LostRegKey.aspx and enter your information.              
  3. Version.  How do I know what version of MTC I am using?   Go to Help-About Make-the-Cut to see what version you are using.                                                                                                              
  4. Version.  What is the latest version?  The latest official version is always available on the MTC website here: http://make-the-cut.com/Default.aspx  Just click the "Download now!" link to get it.                                                    
  5. Version.  People on the forum are talking about another version. Where can I get it?  If there is a newer Beta (trial) version, it will be available in one of the sticky Announcements at the top of the forum. Look for it!                                                               
  6. Upgrades.  How much do upgrades or updates cost?  There is never a charge for upgrades or updates.  Your initial cost for Make-the-Cut! includes free updates and upgrades for life!                       
Using the Program
  1. Tutorials.  I would like to read or watch some tuts, where can I find some?  There are some on this blog, http://papercraftingwithnelda.blogspot.com/search/label/tutorials, Other sires: Scrappy Dew has some great tuts at http://scrappydew.com/tutorials/files/category-make-the-cut-tutorial.php , also cleversomeday http://cleversomeday.wordpress.com/tag/make-the-cut/ , Nancy at http://www.createcricutdesigns.com/p/free-video-tutorials.html                                                 
  2. Custom Shapes tab.  Where is the Custom Shapes tab?  I can't find it anymore. This was moved to make more room for other features.  Don't worry, it is still available! You can always find it by going to File-Import and choose which feature you want. There are also buttons available, either in the Gear Icon (ver. 2) or in a floating toolbar (ver. 3).              
  3. Cupcake Wrappers.  I need help with my cupcake wrappers!  Go here to use Jeannette's calculator: http://forum.make-the-cut.com/discussion/comment/96125/#Comment_96125 or here: http://forum.make-the-cut.com/discussion/9538/challenge-twelve-cupcake-wrappers-by-jeannettec/p1                          
  4. Print and Cut.  Help! I need help with getting my images to cut out well! How did you adjust yours?  I found this discussion to be very helpful: http://forum.make-the-cut.com/discussion/9196/fine-tuning-print-and-cut./p1               
  5. Using SVGs.  I have some svgs, how do I use them in MTC?  Nancy has a great video about this here:  http://www.createcricutdesigns.com/2010/12/video-tutorial-cutting-with-lettering.html        

Friday, December 3, 2010

Text in a circle using MTC 3.0.0

MTC Tutorial: Connecting a word that has parent and Child shapes (for FLRN)

This is for one of the MTC forum members who was having a problem with joining words that had parent and child shapes.